SDRs at the first IF of IC-7410 TRX as a panadator: More detail
Note: I take no responsibility for any attempts at doing what is described here. I am not an expert with these radios and am following my own interpretation of how this is done. It is shared on the basis of the philosophy of amateur radio. The main advantage of a 1st IF tap is avoiding the problem of sharing one antenna with a RTX and SDR; not simple. As mentioned in an earlier post, I have installed a tap into the 1st IF of my IC-7410. The tap is made into the TRX’s first IF (64,455 kHz), above the roofing filters (the key to a good RX). The ICOM even have a socketed test point to do it (some hesitation playing inside a new $2000 TRX! Much reading of circuit diagrams). With the plug (hard to get but only $1.50 and are used on all main brands of RTX), isolation amplifier- http://www.cliftonlaboratories.com/z10000_buffer_amp.htm (gives details of how it is done), preferably through a bandpass filter (obtained but not installed) then to Funcube. I have it running, but not perma...